Workforce management software built for construction sites
Assign engineers to projects, verify every site visit with GPS and face attendance, and track hours and travel between sites — across every active project, in one dashboard. Built for firms running five or fifty sites, not for a single office.
Android & iOS · works offline on low-network sites · rolls out in a day
You run five sites and eight engineers. At 11 AM a client calls asking whether your engineer has reached the Whitefield site. You call him — he says yes. But you still can't see when he arrived, how long he'll stay, or whether he ever reached the two other projects he was assigned today.
Bazat Tracker answers all three from one screen: a geo-fence confirms he's inside the site, his face confirms it's him, and a timestamped route log shows arrival, time-on-site and every other project he touches during the day.
What a multi-site construction firm has to track
Generic HR and attendance tools are built for one office and one biometric device. Site-based work needs a different set of answers.
Which engineer is on which site
A live board of every assigned engineer, supervisor and labour gang, and the site boundary each one is inside right now.
Whether a site visit actually happened
Not a WhatsApp selfie from the gate — a geo-fenced, face-verified arrival with a timestamp.
How long each person stayed on site
Time inside the fence per visit, per engineer, rolled up for payroll and for client billing.
Travel between project locations
The route and distance covered between sites in a day, so conveyance claims can be checked against reality.
Attendance across every project at once
One tower or fifty sites in a single dashboard instead of a status call to each supervisor.
Proof for RA bills and audits
Tamper-evident site-presence records ready the moment a client, contractor or labour auditor asks who was there.
How Bazat Tracker covers it
Six capabilities that turn "he said he was there" into a record you can bill against and audit.
Site assignment
Assign engineers, supervisors and labour to one or more projects for the week. Attendance, geo-fences and reports all follow the assignment.
Geo-fenced site attendance
Draw a boundary around every site. Punch-in only works from inside it — being 500 m away at the tea stall does not count as being on site.
Face-verified punch-in
Every clock-in is matched to the employee's face, so a shared phone or a friend on the register cannot mark someone present.
Mock-location detection
Fake-GPS apps, rooted devices and location spoofing are flagged, so coordinates cannot be faked to beat the geo-fence.
Route history between sites
Replay any employee's full day — the path taken, every site fence entered, arrival and departure times, and distance travelled.
Billing-grade reports
Export location-verified attendance and time-on-site per engineer as reports you can attach to running-account bills or hand to an auditor.
Rolling it out across your sites
- 1
List your active sites
Add each project and draw its geo-fence on the map. A radius of 80–150 m suits most sites; tighten it for congested urban plots.
- 2
Assign your people
Assign engineers, supervisors and labour gangs to the sites they work this week. Reassign in seconds when priorities move.
- 3
Roll out the app
Each person installs the Android or iOS app and does one practice punch-in inside the fence with their supervisor watching.
- 4
Set hours and overtime rules
Define shift timings, grace periods and OT rules once, so working hours compute automatically from real site presence.
- 5
Review and export
Watch the multi-site board daily. At month-end, export the verified attendance and site-visit reports for payroll and client billing.
Paper register vs generic app vs Bazat Tracker
| Capability | Paper muster roll | Generic HRMS / attendance app | Bazat Tracker |
|---|---|---|---|
| Per-site geo-fenced attendance | |||
| Face verification on every punch | |||
| Mock-location / fake-GPS detection | |||
| Route & distance between project sites | |||
| Time-on-site per engineer | |||
| Live multi-site headcount board | |||
| Offline capture on low-network sites | |||
| Billing / RA-bill ready site-visit exports | |||
| Built around the site, not one office |
Partial = supported for a single fixed location, or without face / anti-spoofing checks.
Sites lose network. Workers share phones. Registers get "adjusted" before payroll. Bazat Tracker captures punches and location offline and syncs them when signal returns, verifies each punch against a face, and generates attendance automatically from location data the moment it happens — so there is no register left to edit.
Explore more
- Site engineer tracking
- Track employees across multiple sites
- Verify employee site visits
- Time spent on each site
- Stop attendance from outside the site
- GPS attendance app
- Geofencing attendance system
- Face attendance app
- Best construction workforce software in India
- Bazat Tracker vs Unolo
- Construction industry overview
- Construction workforce guides
- Pricing
Construction workforce management — FAQs
Every engineer and worker is assigned to one or more sites. When they open the app to punch in, Bazat Tracker checks their GPS position against that site's geo-fence and verifies their face, then shows you a live board of who is inside which site boundary right now — across every active project.
No. Punch-in is blocked unless the employee's own phone is physically inside the site's geo-fenced boundary, and the punch is tied to a face check. Mock-location and rooted-device attempts are flagged, so attendance cannot be marked from the tea stall, from home, or from another site.
Open his route history for that day. You will see the exact path he travelled, every site geo-fence he entered, the time he arrived, how long he stayed, and when he left — so 'I reached the site' is a record, not a claim.
Bazat Tracker records the route and distance between every site an employee visits in a day. You can replay the full day, see stop durations, and compare claimed conveyance against the distance actually travelled.
Yes. Location-verified attendance, time-on-site per engineer, and site-visit logs export as tamper-evident reports you can attach to running-account bills or produce when a client or auditor disputes who was on site.
Yes. Punches and location events are captured offline on the device and sync automatically once the phone regains signal, so basement floors, outskirts sites and monsoon dead zones don't break the attendance record.
Each worker punches from a phone tied to their profile. For gangs that share devices, supervisors can run a face-verified group check-in inside the site fence, so shared phones still can't produce proxy attendance.
Generic tools are built around a single office. Bazat Tracker is built around the site: per-site geo-fences, site assignment, multi-site live headcount, route history between projects, and billing-grade site-visit proof — the things a firm running five or fifty sites actually needs.
See it on your sites in a 15-minute demo
Bring your project list. We'll show you the multi-site board, a live geo-fenced punch-in, and the site-visit report you'd attach to an RA bill.